C80 Dodo
The C80 Dodo features a short, reverse "S" shaped blade and a large, ergonomic G-10 handle. Spyderco's Ball Bearing Lock was first used for the C80. The C80 was introduced in 2003 and discontinued in 2006.
Appearance in catalogs
The C80 Dodo appeared in the following catalogs (older, newer):
- 2003 Spyderco Products (C80GBL)
- 2004 Spyderco Products (C80GBL)
- 2005 Spyderco Products (C80GBL, C80GBK)
Designer
History, mentionings from the forums etc.
- Dodo review by "DAYWALKER" on the Spyderco forum.
- Dodo taken apart by "cyberspyder" on the Spyderco forum.
Information from the Spyderco catalog on the web
C80GBL:
"Spyderco has received endless comments about the Dodo's unconventional, unusual appearance. With a face only its designer could love, the Dodo fulfills many of Spyderco's design philosophies. It's a 'little big knife' that was 'designed in the dark' (and should be judged by its ergonomics) which we manufacture with top-drawer materials and features. Take our challenge -- put it in your hand, cut with it, then let us know what you think.
One of its curious features is its blade shape. Although the blade has less than two inches of cutting edge, the curved belly supplies big cutting capability and its downward-pointed tip is intended for detailed/fine cutting. The blade is laser cut from CPM-S30V stock, then hollow-ground with a swedge running from the tip halfway up the spine. To create a fistful of leveraging points, the G-10 handle is fashioned in a grouping of finger choils ending in a tail. The tail becomes both a pinky shelf and a striking tool. For the Dodo specifically, Spyderco developed the Ball Bearing Lock. It works by dropping a pea-sized ball of steel into a recess on the blade's tang, locking the blade open. Once in the recess, the ball is compressed by the open blade and can't move or wobble. A remarkably strong locking system, that rates for MBC and heavy-duty on Spyderco's lock strength scale. To unlock, pull back on the ball- accessible on both sides of the knife for left/right handed use. Flexible wire tension-clip carries ambidextrously, tip-up. Available with a black or blue handle. Made in Golden, Colorado."[1]
See also: C80GBK [2].
Variations
The C80 Dodo is made in Golden, U.S.A., and has a
SKU | Handle | Edge(s) | Steel | From/To | MSRP | Note | Number made | Grind | Clip | Clip positions | Collectors club |
C80GPBL | Blue G-10 | PE | CPM-S30V | 2003-2005 | 124.95$ (2004) | N/A | Hollow | Wire clip | LH/RH, TU | ||
C80GSBL | Blue G-10 | SE | CPM-S30V | 2003-2005 | 124.95$ (2004) | N/A | Hollow | Wire clip | LH/RH, TU | ||
C80GPBK | Black G-10 | PE | CPM-S30V | late 2003-2005 | 124.95$ (2004) | N/A | Hollow | Wire clip | LH/RH, TU | ||
C80GSBK | Black G-10 | SE | CPM-S30V | late 2003-2005 | 124.95$ (2004) | N/A | Hollow | Wire clip | LH/RH, TU |
Most collectible variation
Questions regarding collecting the C80
Some interesting questions we are looking for an answer to:
Questions with an answer:
Technical information
Measurements (mm and grams) of the C80 Dodo:
Variation | Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
C80 | 156mm | 111mm | 53mm | 44mm | 13mm | 3mm | 74g |
Measurements (inches and ounces) of the C80 Dodo:
Variation | Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
C80 | 6 1/8" | 4 3/8" | 2 1/16" | 1 3/4" | 1/2" | 1/8" | 2.6oz |
References
- ↑ The C80GBL Dodo in Spyderco's online catalog
- ↑ The C80GBK Dodo in Spyderco's online catalog