C07 Police

From Spydiewiki
Jump to navigationJump to search

The C07 Police was first introduced in 1984 as the 1007 and is currently still available. Many variations of the Police exist.

The C51 Rookie is a smaller sized version of the Police.

Generations

The C07 Police has a long history. Three generations can be differentiated which are described in the following.

                                    2008
                                    |- Generation 3 ->
|-- Generation 1 --|----------- Generation 2 -------->
1984               1991-1994?

Generation 1

The first C07 Police variations introduced in the 80s all having stainless steel handles are considered first generation Polices (P1).

GIN-1/G-2 steel was used for all P1 blades.

Generation 2

Around 1991-1994(?) the second generation of the C07 Police (P2) was introduced. The major modifications from the P1 are

  • the lock release position moved backward to mid-position,
  • beveled handles.

The G-2 stamp[1] on the blade was used from around 1992 to 1994. Prior to 1992 Spyderco knives were not marked with the steel used. In 1994, the steel remained the same, but the marking was changed to GIN-1, the name given by the steel's manufacturer.

A Boye dent was added in 2001.

From 1998 to 2001 variations with G-10 handles were available.

Generation 3

The third generation of the Police (P3) was introduced in 2008. The most prominent modifications from the P2 are

  • 4-way clip allowing left and right hand carrying with tip-up or tip-down,
  • screw together construction,
  • modified blade shape.

Appearance in catalogs

The C07 Police appeared in all annual Spyderco product catalogs since about 1985 (older, newer):

  • Generation 1: 1984?, 1985 - at least 1990
  • Generation 2: since at least 1994
  • Generation 3: 2008 Mid-Year Product Supplement and 2009 Spyderco

Designer

Spyderco?

History, mentionings from the forums etc.

Information from the Spyderco catalog on the web

C07:

"Time and again law enforcement officers have opted for the Police Model since its debut in 1984. Spyderco packs as much blade length as possible into the handle for big cutting power in a slim profile."

"The Police Model has a David Boye dent cut out of the locking lever allowing you to gorilla grip the knife without accidentally releasing the lock. The blade is hollow-ground VG-10 and thick at the tip for added strength with a weight-reducing swedge along the spine. All stainless, the handle is perfect for engraving or embossing. Steel clip positions the knife for tip-down pocket carry."[2]

C07G3:

"It’s been twenty years since the Spyderco Police Model was introduced and it remains a cutlery icon. It was designed to have an as large as possible blade built into a thin, equally sized handle. Because of this, Save and Serve professionals continue buying the Police Model as an essential tool for their trade. Since its introduction, new handle materials like G-10 have become available in the cutlery industry., and requests for a G-10 handled Police Model poured in. We accommodated, and re-engineered with a finger choil, a full flat ground blade, and released the Police3."

"The benefits of G-10 as a handle material are many. It can support a building, be drilled and sawed. It’s doesn’t retain heat or cold, shuns chemicals, discoloration and peeling. Two finger indents in the handle position the gripping hand for maximum control. The C07G blade is flat-ground VG-10: a high carbon, cobalt enhanced steel that sharpens-up easily and retains its edge. Mid-positioned backlock features a David Boye Dent for added lock security. A 4-way clip positions the folder to carry tip-up/tip-down and left- or right-handed."[3]

Variations

All Police variations are made in Seki City, Japan, and have:

Variations of the Police 1

SKU Handle Edge Steel From/To MSRP Note Number made Grind Clip Clip positions Collectors club
C07 (PIG) Stainless Steel PE SE GIN-1/G-2 1984-?, 1986 65.95$ (1986) "Pride Integrity Guts" engraved on blade ~2400 (~20% left hand) Hollow 3- screw old standard clip LH+RH, TD
C07 Stainless Steel PE SE GIN-1/G-2 ?, 1990 ? "POLICE MODEL" on blade N/A Hollow 3- screw old standard clip LH+RH, TD

Variations of the Police 2

SKU Handle Edge Steel From/To MSRP Note Number made Grind Clip Clip positions Collectors club
C07 LH Stainless Steel SE GIN-1/G-2 199?-1998 121.95$ (1994) except early batches: "POLICE" on blade N/A Hollow 3- screw old standard clip LH, TD
C07 RH Stainless Steel PE SE GIN-1/G-2 199?-1998 121.95$ (1994) except early batches: "POLICE" on blade N/A Hollow 3- screw old standard clip RH, TD
C07 Stainless Steel PE SE ATS-55 1999-2001 ? 2001: incl. Boye dent, "POLICE" on blade N/A Hollow 3- screw old standard clip LH+RH, TD
C07 Stainless Steel PE PS SE VG-10 2002- 132.95$ (2004), 164.95$ (2009) "POLICE" on blade N/A Hollow 3- screw old standard clip RH, TD
C07G Black G-10 PE SE ATS-55 1998 146.95$ (1998) "POLICE" on blade, unlined N/A Flat Saber Metal black RH, TD
C07G Black G-10 PE SE ATS-55 1999-2001 ? 2001: incl. Boye dent, "POLICE" on blade, single liner, partially screwed construction. N/A Full Flat Half- moon clip RH, TD

See above (Section Generation 2) remarks regarding additional variations of GIN-1/G-2 blade stamps.

Variations of the Police 3

SKU Handle Edge Steel From/To MSRP Note Number made Grind Clip Clip positions Collectors club
C07G3 Black G-10 PE SE VG-10 2008- 219.95$ (2009) N/A Full Flat 4-way LH/RH, TD/TU Both edges Variant

Other variations

SKU Handle Edge Steel From/To MSRP Note Number made Grind Clip Clip positions Collectors club
C07SA Aluminum uncoated PE? SE GIN-1/G-2 1989-? ? pins visible/flush ? Hollow Metal RH, TD?
C07BK Black, Titanium Carbo-Nitride coated Stainless Steel PE SE GIN-1/G-2 1992, ?, 1994, ?, 1996 146.95$ (1994), 189.95$ (1996) Police Blak Ti ? Hollow Metal LH+RH, TD
C07BK Black, Titanium Carbo-Nitride coated Stainless Steel PE SE ATS-55 ?, 1998 189.95$ (1998) Police Blak Ti; left hand version? ? Hollow Metal RH, TD
C07ATU Gray TuFFram coated Aluminum PE SE GIN-1/G-2 1993-1995 146.95$ (1994) 1993, 1994: without "POLICE" on blade, 1995: "POLICE" on blade, 4oz, pins visible; left hand version? ? Hollow Metal RH, TD
C07STI TI PS SE ATS-34 1992-? 295.95$ pins visible/flush; left hand version? 500xPS, 500xSE Hollow Metal RH, TD
C07CFRHP Black CF PE SE VG-10 2003 189.95$ (2003) Sprint, "POLICE" on blade, boye dent; Right hand version. 1500 Hollow Half- moon clip RH, TD
C07CFRHS Black CF PE SE VG-10 2003 189.95$ (2003) Sprint, "POLICE" on blade, boye dent; Right hand version. 1500 Hollow Half- moon clip RH, TD
C07CFLHP Black CF PE SE VG-10 2003 189.95$ (2003) Sprint, "POLICE" on blade, boye dent; left hand version. 1500 Hollow Half- moon clip LH, TD
C07CFLHS Black CF PE SE VG-10 2003 189.95$ (2003) Sprint, "POLICE" on blade, boye dent; Left hand version 1500 Hollow Half- moon clip LH, TD
C07SGBE Stainless Steel with Gary Blanchard embellishing SE 1993-? 285,95 us $ (1994) Different variations exist, there was no system as to what knives got embellished[4] Hollow 3- screw old standard clip
C07 Stainless Steel with Santa Fe stoneworks wood overlay. SE? ? Usually called Earthling (which is what Santa Fe still calls this particular overlay), this model was rather expensive, and not many were made. Hollow Metal
C07 Stainless Steel with David Yellowhorse embellishing SE and PE? ? The prototype had embellishment on both sides, but the production model only had on the none-clip side. Hollow Metal

Most collectible variation

Questions regarding collecting the C07

  • There are open questions marked with '?' above and below. Any answers?

Technical information

Measurements (mm and grams) of the C07 Police:

Variations Length overall Length closed Length blade Length edge Hole Ø Blade thickness Weight
Police 1 ? ? ? 98mm ? ? 154g
Police 2 SS 241mm 135mm 104mm 97mm 12mm 3mm 159g
Police 2 G-10 241mm 135mm 104mm 97mm 12mm 3mm 97g
Police 3 251mm 141mm 111mm 102mm 13mm 3mm 140g

Measurements (inches and ounces) of the C07 Police:

Variations Length overall Length closed Length blade Length edge Hole Ø Blade thickness Weight
Police 1 ? ? ? 3 7/8" ? ? 5.44oz
Police 2 SS 9 1/2" 5 5/16" 4 1/8" 3 13/16" 15/32" 1/8" 5.6oz
Police 2 G-10 9 1/2" 5 5/16" 4 1/8" 3 13/16" 15/32" 1/8" 3.4oz
Police 3 9 7/8" 5 9/16" 4 3/8" 4" 1/2" 1/8" 5oz

References

  1. A comment by Sal Glesser on the G-2 stamp can be found on the Spyderco-Forums[1]
  2. The C07 Police (2nd generation) in Spyderco's online catalog
  3. The C07G3 Police in Spyderco's online catalog
  4. See this thread on Spyderco forums.

Pictures

Categories