Difference between revisions of "C269 PITS 2 Slipit"
ThatWouter (talk | contribs) (Created page with "The '''C269 PITS 2 Slipit''' is part of Spyderco's SlipIt series of non-locking folding knives. ==Appearance in catalogs== The C269 PITS 2 Slipit appeared in the follow...") |
ThatWouter (talk | contribs) |
||
| Line 24: | Line 24: | ||
The C269 PITS 2 Slipit is made in Italy and features: | The C269 PITS 2 Slipit is made in Italy and features: | ||
* A non-locking mechanism that consists of two integral spring arms machined into the handle scales. | * A non-locking mechanism that consists of two integral spring arms machined into the handle scales. | ||
* A modified [[Sheepsfoot]] | * A modified [[Sheepsfoot Blade]] shape | ||
{|{{Articletable}} | {|{{Articletable}} | ||
Revision as of 20:24, 17 February 2025
The C269 PITS 2 Slipit is part of Spyderco's SlipIt series of non-locking folding knives.
Appearance in catalogs
The C269 PITS 2 Slipit appeared in the following catalogs:
Designer
History, mentionings from the forums etc.
Information from the Spyderco catalog on the web
C269 PITS 2 Slipit
"British knifemaker Mike Read specializes in crafting state-of-the-art non-locking folding knives. His first Spyderco collaboration, the PITS (short for “Pie in the Sky”—Read’s forum name on British knife forums), redefined the form of this genre. The PITS 2 takes that evolution a step further with a truly unique non-locking mechanism that consists of two integral spring arms machined into the handle scales. The forward end of these arms, which supports the blade pivot, flexes as the blade is opened to provide pressure for its notched-joint mechanism to bear against the stop pin. Meticulously machined from solid 6AL-4V titanium, the matte-finished handle scales are paired with a full-flat-ground, satin-finished blade crafted from Böhler-Uddeholm’s M398 particle metallurgy stainless steel. A remarkable expression of Spyderco’s SLIPIT™ concept, the PITS 2’s symmetrical design is complemented by a fully accessible Trademark Round Hole in the blade and a reversible tip-up pocket clip to make every aspect of its carry and operation completely ambidextrous."[1]
Variations
The C269 PITS 2 Slipit is made in Italy and features:
- A non-locking mechanism that consists of two integral spring arms machined into the handle scales.
- A modified Sheepsfoot Blade shape
| SKU | Handle | Edge(s) | Steel | From/To | MSRP | Note | Number made | Grind | Clip | Clip positions | Collectors club |
| C269TI | Ti | PE | M398 | 2025 - | $350.00 (2025) | Regular production | Full Flat grind | Modified Hourglass | LH/RH, TU | Main |
Most collectible variation
Any variation of the C269 in mint condition with original packaging and paperwork would be considered collectible.
Questions regarding collecting the C269
Some interesting questions we are looking for an answer to:
Questions with an answer:
Technical information
Measurements (mm and grams) of the C269 PITS 2 Slipit:
| Variation | Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
| C269TI | 164mm | 96mm | 70mm | 65mm | 3.0mm | 88g |
Measurements (inches and ounces) of the C269 PITS 2 Slipit:
| Variation | Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
| C270TI | 6.45" | 3.76" | 2.74" | 2.56" | 0.118" | 3.1oz |
References
- ↑ The C269 PITS 2 Slipit in Spyderco's online catalog
