C27 Jess Horn

From Spydiewiki
Revision as of 15:41, 11 March 2009 by The Deacon (talk | contribs) (New page: ==Jess Horn== The C27 Jess Horn was a collaboration with Jess Horn, one of America's premier custom knife makers and was produced for Spyderco by Moki in Japan. It holds several distinct...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Jess Horn

The C27 Jess Horn was a collaboration with Jess Horn, one of America's premier custom knife makers and was produced for Spyderco by Moki in Japan. It holds several distinctions. It is the only Spyderco branded folder which does not use the trademark "Spyderhole" round hole opener. Instead it uses an alternate impementation of Spyderco's original patent which consists of a pair of trapezoidal depressions, one on each side of the blade to allow one hand opening. At the time of its introduction, it was the most expensive single folder Spyderco had produced to that date. It is also the only Spyderco branded folder offered with a serrated edge which does not use Spyderco's trademark "Spyderedge" serrations but, instead, uses small serrations of equal size. Finally, it is the only Spdyerco model where a serrated version was produced but the plain edged version was the "main" Collectors Club piece.

Appearance in catalogs

The C27 Jess Horn first appeared in the 1994 Spyderco catalog/brochure. It remained in the catalog until 1998.

Designer

Jess Horn

History, mentionings from the forums, etc.

Information from the Spyderco catalog on the web

Description from the original 1994 "Welecome to the World of Spyderco" brochure...

"Unlike most CLIPiTs, the Jess Horn model was not designed with a thumb-hole in the blade. It can, however, be easily opened with one hand by using hte trapezoid indent. The handle is embellished with a "jigged bone" that is specially made for Mr. Horn. The front lock incorporates a spring and spacer between the scales as one polished piece. The entire knife reflects Jess's custom style and signature. This is one of the world's finest custom manufactured knives. From the jigged bone handle to the meticulously sculpted stainless clip, this folder boasts precise fit and finish that is second to none in manufacturing. Efen the lanyard hole features attention to detail - it's chamfered and lined. This collaboration between Jess Horn and Spyderco represents a superb value for collectors considering a Jess Horn custom would equal three to four times the cost."

Cost, at that time was $349.95

Variations

As mentioned earlier, the C27 Jess Horn was built in Japan, by Moki. It was available in both plain and serrated edge. While there are no "variants" per se, there are a number of variations in marking. The Collectors Club numbered pieces were numbered on the left bolster and at least some of them do not carry Jess Horn's signature engraved on the blade. Higher numbered pieces were numbered on the blade. Some un-numbered pieces also were produced. Finally, there were some "leftovers" from this run sold by Moki under their own label without the Spyderco name on the blade tang.

Variations of the C27 Jess Horn

SKU Handle Edge(s) Steel From/To MSRP Note Number made Grind Clip Clip positions Collectors club
C27 Jigged Bone scales Stainless Steel front bolsters and liners SE, PE ATS-34 1994- 1998 $349.95 (1994) 1200 (600 ea PE/SE) Full Flat machined stainless steel 3 screw TD Yes - PE version

Most collectible variation

As with most collectible Spyderco knives, the PE version is most favored by collectors.

Questions regarding collecting the C27 Jess Horn

Are there Collectors Club numbered SE knives? Are there PE Collectors Club numbered knives "signed" by Jess Horn

Technical Information

Typical measurements (mm and grams) of the C27 Jess Horn:

Variation Length overall Length closed Length blade Length edge Hole Ø Blade thickness Weight
C27 Jess Horn 152mm 89mm 67mm 60mm no hole, trapezoidal indent 2.4mm 69g

Typical measurements (Inches and ounces) of the C27 Jess Horn:

Variation Length overall Length closed Length blade Length edge Hole Ø Blade thickness Weight
C27 Jess Horn 6in 3 1/2in 2 5/8in 2 3/8in no hole, trapezoidal indent 3/32in 2.4oz

References

Pictures