Difference between revisions of "C179 Spy-DK"
m (→Variations) |
m (→Designer) |
||
Line 7: | Line 7: | ||
==Designer== | ==Designer== | ||
[[Sal Glesser]] | |||
==History, mentionings from the forums etc.== | ==History, mentionings from the forums etc.== |
Revision as of 17:59, 1 June 2014
The C179 Spy-DK was introduced in 2014 and is designed to comply with Danish laws.
Appearance in catalogs
The C179 Spy-DK appeared in the following catalogs:
Designer
History, mentionings from the forums etc.
Information from the Spyderco catalog on the web
C179 Spy-DK:
"The Spy-DK is based on the platform of the UK Penknife. Its blade is full-flat ground from Böhler-Uddeholm’s premium N690Co stainless steel, but its length is reduced to comply with Danish law. The Trademark Round Hole clearly identifies it as a Spyderco knife and provides a handy purchase for two-handed opening, but the hole is purposely small to prevent one-handed blade-opening methods. Its stout notched-joint mechanism is also powered by a strong spring that helps hold the blade securely in the open and closed positions, supporting its safe use as a cutting tool while precluding one-handed opening.
The Spy-DK’s lightweight handle is constructed of injection-molded fiberglass-reinforced-nylon (FRN) scales attached directly to the stainless steel back spacer/spring. The molded checkered pattern on the scales and a textured index-finger choil at the juncture of the blade and handle ensure a secure grip and allow the user’s index finger to serve as a natural stop to prevent unintentional closure during use. A reversible deep-pocket wire clip provides both left and right-side tip-up carry, keeping the knife accessible for immediate use while naturally blending with virtually any color of clothing.
Although created to conform with Danish knife laws, the Spy-DK’s highly functional design and socially friendly demeanor make it a perfect choice for knife users everywhere. It combines convenient clip carry and a purposeful two-hand-opening into a design that redefines the non-locking pocketknife."
The black C179 Spy-DK in Spyderco's online catalog
The orange C179 Spy-DK in Spyderco's online catalog
Variations
The C179 Spy-DK is made in Italy and has
- Slipit Notch Joint non-locking mechanism
- Small, non-functional Spyderhole requiring two-handed opening
SKU | Handle | Edge(s) | Steel | From/To | MSRP | Note | Number made | Grind | Clip | Clip positions | Collectors club |
C179PBK | Black checkered pattern FRN | PE | N690Co | May 2014- | 79.95$ (2014) | N/A | Full Flat | Deep carry silver Wire | LH/RH, TU | Main | |
C179POR | Orange checkered pattern FRN | PE | N690Co | May 2014- | 79.95$ (2014) | N/A | Full Flat | Deep carry silver Wire | LH/RH, TU | Variant |
Most collectible variation
Questions regarding collecting the C179
Some interesting questions we are looking for an answer to:
Questions with an answer:
Technical information
Measurements (mm and grams) of the C179 Spy-DK:
Variation | Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
C179P | 160mm | 91mm | 68mm | 58mm | 5mm | 2.8mm | 57g |
Measurements (inches and ounces) of the C179 Spy-DK:
Variation | Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
C179P | 6.29" | 3.60" | 2.69" | 2.30" | 0.20" | 0.110" | 2.0oz |
References