C10 Endura

The C10 Endura is one of Spyderco's most recognizable knives. It as gone trough 4 major revisions since its inception.

Generation I The first generation was made with FRN handles with a molded clip. The clip was prone to breaking off if it was bent too much so the next batches had thicker ones. (Spyderco is known for always refining its products and listening to their customers concerns). The steels used in these were either G2, GIN 1, or AUS8, sometimes the blade would not be marked with any type of steel at all, in that case it is the G2 or GIN 1(one in the same). The handle came in three different colors black, green and red. (in future knives for Spyderco the color red is strictly used for trainers only) There was also a black coated blade with black scales. The blade came in all 3 variations, full serrations, partial serrations and plain edge although all weren't made with every color handle.

Designer

Sal Glesser

Variations

Variations of the Endura

SKU	Handle	Edge	Steel	MSRP	Note	Number made	Grind	Clip

Technical information

Typical measurements (mm and grams) of the C10 Endura:

Length overall	Length closed	Length edge	Hole Ø	Blade thickness	Weight
mm.	mm.	mm.	mm.	mm.	g.

Typical measurements (Inches and ounces) of the C10 Endura:

Length overall	Length closed	Length edge	Hole Ø	Blade thickness	Weight
"	"	"	"	"	oz.