C03 Hunter
The C03 Hunter and the smaller sized C04 Executive were Spyderco's response in 1983 to customers requesting models with a robust blade tip. In 1994 a new version of the Hunter was made that uses the blade of the previously released C13 Pro-Grip. This version of the Hunter is also known as the Ironstone Hunter, because it was first marketed by Ironstone (the former Spyderco Factory Outlet), but it has never been an exclusive for Ironstone. In 1995 the Hunter was discontinued.
The C03 Hunter is the starting point for a family of models (cf. C13 Pro-Grip for a chronological overview):
- C13 Pro-Grip: Upgrade of the C03 that uses Kraton in the handle (aka Pro-Hunter or Pro-Venator)
- C33 Pro-Grip: A leightweight version of the C13 with FRN handles (aka Pro-Venator light-weight, SKU changed later to C13)
Appearance in catalogs
The C03 Hunter appeared at least in the 1986, 1990, 1993, and 1994 annual Spyderco product (catalogs. (other catalogs in 1983-1994 range?)
Designer
Spyderco
History, mentionings etc. from the forums
Information from the Spyderco catalog on the web
Not listed.
Variations
All Hunter variations are made in Seki City, Japan, and have a
- Back Lock locking mechanism, a
- drop-point style blade, and a
- metal clip in right and left hand versions, tip-down.
Starting around 1992 a "G-2" stamp was put on the blades. In 1994? the stamp was changed to "GIN-1".
SKU | Handle | Edge(s) | Steel | MSRP | Note | Number made | Grind | Clip | Collectors club |
C03P | Stainless Steel | PE | GIN-1/G-2 | 98.95$ (1993) | 1983-1993 | N/A | Hollow | Metal, right and left hand versions, tip-down | |
C03S | Stainless Steel | SE | GIN-1/G-2 | 98.95$ (1993) | 1983-1993 | N/A | Hollow | Metal, right and left hand versions, tip-down | |
C03PS | Stainless Steel | PS 40/60 | GIN-1/G-2 | 104.95$ (1994) | 1994, new blade style of C13 | N/A | Hollow | Metal, right and left? hand versions, tip-down | |
C03PS | Stainless Steel | PS | GIN-1/G-2 | ? | 1994, new blade style, with wood inlay instead of FRN? (Japanese only? C13-variation?) | N/A | Hollow | Metal, right and left hand versions?, tip-down |
Most collectible variation
Questions regarding collecting the C03
- There are open questions marked with '?' above and below. Any answers?
Technical information
Measurements of the C03 Hunter:
Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
? | ? | 67mm | ? | ? | ? | 109g |
6 5/8" | ? | 2 5/8" | ? | ? | 1/8" | 3.84oz |
Measurements of the C03 Hunter with newer blade style:
Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
? | ? | ? | ? | ? | ? | ? |
6 5/8" | ? | 2 3/4" | 2 5/8" | ? | 1/8" | 3.75oz |
References