Spyderco byte - April 2019: Difference between revisions

From Spydiewiki
Jump to navigationJump to search
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 71: Line 71:


The injection-molded handle literally revolutionized modern folding knife design. Spyderco is proud to have been one of the pioneers in that effort, and even prouder to continue the evolution of that technology with our broad selection of high-performance, lightweight cutting tools.
The injection-molded handle literally revolutionized modern folding knife design. Spyderco is proud to have been one of the pioneers in that effort, and even prouder to continue the evolution of that technology with our broad selection of high-performance, lightweight cutting tools.


==Shows==
==Shows==

Latest revision as of 15:57, 6 November 2026

The Spyderco byte April 2019 e-newsletter was sent out on 30 April 2019, and it contained the following articles.

Para 3

C223GP

MSRP: $140.00

Origin: USA


The Para 3 Lightweight is the newest member of a proud Spyderco family that began with the introduction of the original Military™ model in 1996. One of the most iconic folding knives ever created, the Military later inspired the first-generation Para Military™ design in 2004, and the more refined Para Military 2 in 2010. While the Para Military and Para Military 2 were specifically created to distill the high-performance features of the Military into a more compact package, the process didn’t stop there. To meet the needs of end users who wanted an even smaller format and a more legally friendly three-inch blade, in 2016, Spyderco unveiled the Para™ 3.

Initial production of the Para 3 followed the pattern of its predecessors, featuring textured G-10 scales supported by nested, skeletonized stainless steel liners. This style of construction supported the knife’s patented Compression Lock™ mechanism and allowed the rapid introduction of a number of different model variations that paralleled the popular Para Military 2 family. That was just the beginning, though. We had bigger plans for the Para 3.

Because it offered such an exceptional balance of compact size and big-knife cutting performance, we felt the Para 3 design had tremendous potential. We were also determined to share the design in a budget-friendly format that made it affordable to as many knife users as possible. So, we gave our Research & Development team and in-house engineers marching orders to develop an economical version of the Para 3 that took full advantage of lightweight, injection-molded parts. After many months of design, prototyping, performance testing, and refinement, the Para 3 Lightweight emerged and we knew we had created something truly special.

The defining feature of the Para 3 Lightweight is its handle construction, which incorporates lightweight scales injection molded from tough fiberglass-reinforced nylon (FRN). In addition to being more economical than scales machined from solid G-10, the FRN scales also allow the precision molding of Spyderco’s non-slip Bi-Directional Texture™ pattern on the outside surfaces of the scales and intricate structural details on the interiors.

Instead of the large nested liners used in the G-10 Para 3, the Lightweight’s streamlined design includes a minimalist liner on one side of the blade’s pivot and a separate stainless steel lock bar. Both are firmly nested into molded cavities in the scales, which also include molded-in threaded inserts that anchor key assembly screws.

The Para 3 Lightweight’s blade is crafted from nitrogen-enriched CTS® BD1N stainless steel and sports an attractive tumbled finish. Available with a choice of a PlainEdge™ or fully serrated SpyderEdge™, it pivots on a specially designed precision bushing. A phosphor bronze washer provides a low-friction bearing surface between it and the partial stainless steel liner, while an integrally molded boss provides a smooth bearing surface on the other side. The blade’s Trademark Round Hole™ is fully accessible from both sides for swift, ambidextrous, one-handed opening.

Like other Para 3s, the Lightweight has an easy-to-clean open-backed construction style that helps further reduce its weight. And although it is almost 30 percent lighter than its G-10 counterparts, its patented Compression Lock mechanism still ensures outstanding dependability, structural strength, and ease of operation.

Another significant difference between the Para 3 Lightweight and its G-10 brethren is the configuration of its pocket clip and lanyard hole. The lanyard hole is located closer to the spine of the handle, providing clearance for the clip, while still allowing the easy attachment of lanyards and fobs. Instead of the four-position stainless steel clip of the G-10 Para 3, the lightweight sports a deep-pocket wire clip that mounts at the very butt end of the handle. Although the reversible wire clip allows the knife to ride significantly lower in the pocket and blends easily with pants material, the trade-off is that it only offers tip-up carry.

The Para 3 Lightweight represents a whole new dimension of this popular model, as well as a new chapter in our proud history as a pioneer in ultra-lightweight knife design.


Overall: 7.21 in / 183 mm

Blade: 2.92 in / 74 mm

Edge: 2.58 in / 66 mm

Weight: 2.4 oz / 68 g

Grind: Full-Flat

Origin: USA


Injection-Molded Knife Handles

In 1981, legendary knife designer Blackie Collins created the LST® (Light, Smooth, Tough) for the equally influential Pete Gerber of Gerber Legendary Blades. Based on Gerber’s best-selling Folding Sportsman I design, the LST was the first conventional lock-blade folding knife to use an injection-molded handle. While the Finnish Hackman Camp Knife, a balisong-style folder rumored to have been issued by the CIA in Vietnam, predated Collins’ design, both the engineering and the material choice of the LST’s handle were considerably more sophisticated. Specifically, the LST pioneered the concept of a one-piece injection-molded folder handle and the use of DuPont™ Zytel®, a glass-filled nylon resin.

Generically known as FRN (fiberglass-reinforced nylon), Zytel offered many advantages as a handle material. It was tough, extremely lightweight, could be made in a rainbow of colors, and could be molded into intricate shapes, forms, and textures to create parts that did not require any subsequent machining. Although the molding process did require a substantial initial investment in tooling, it yielded ready-to-assemble parts far more efficiently and cost effectively than machining them from solid stock. For the cutlery industry, the introduction of FRN handles was a game changer.

While Blackie Collins was making history with injection-molded handles, Spyderco was making its own mark on the industry as the pioneer of clip-carry knives. In 1990, Spyderco founder Sal Glesser integrated the two concepts, creating the first-generation Endura® and Delica® Lightweight Models and once again revolutionizing the form of the modern folding knife. Using state-of-the-art molding technology at the time, these groundbreaking designs had one-piece FRN handles that included integral, molded clips configured for right-side, tip-up carry. The side opposite the clip also featured our Volcano Grip™ texture pattern for a secure, non-slip grip. Although the integral clip would later be transcended by more versatile clip options, the original Delica and Endura Lightweights were landmark products for their time and once again set the standard for the knife industry.


Nylon, FRN, and Injection Molding

The base element in injection-molded knife handles is nylon. Nylon is a synthetic thermoplastic that was first produced in 1935 by Wallace Carothers, an American chemist working for DuPont. An incredibly versatile material, nylon can be shaped into various forms, including filaments, fibers, films, and sheet stock. While natural nylon is typically off-white, it can also be dyed to achieve virtually any imaginable color.

The production of nylon typically starts with distillation from crude oil, but it can also be produced from biomass. It becomes liquid at its melting point of 220 degrees Celsius (428 degrees Fahrenheit) and, as a true thermoplastic, can actually be cooled and melted again without significant degradation. This makes it ideal for injection molding applications.

In principle, the injection molding process is simple. First, the base material is heated until it melts into a viscous liquid state. The injection-molding machine, or press, then forces that material into a closed mold—also known as a tool or a die—that defines the shape of the part. Once the material cools sufficiently to revert to a solid form, the mold is opened and the finished part is extracted. While all this sounds deceptively easy, the technology and the specialized materials behind it are actually very sophisticated—especially if you are trying to achieve specific performance qualities in the finished part.

In its pure state, nylon is very flexible and will bend before it breaks. While this quality may be desirable for fabrics, rope, webbing, and similar materials, most solid parts have different requirements. For that application, the nylon is often “filled” with glass fibers—typically between 10% and 40%. “Glass-filled” nylon is more rigid and has a much greater tensile strength. Synonymous with FRN, it has long been the standard handle material of Spyderco’s many lightweight models featuring injection-molded handles.


FRCP

Although nylon can be dyed practically any color, in solid parts it is basically an opaque material. When Spyderco began developing the Manix™ 2 Lightweight about 10 years ago, one of the qualities we wanted to achieve was to make the handle transparent or translucent to highlight its internal mechanism. To do that, we had to find a different injection-moldable material that offered the same advantages as FRN, but was clear or translucent.

Working in close cooperation with leading plastics experts, Spyderco chose fiberglass-reinforced copolymer (FRCP) as the best material for the Manix 2 Lightweight project. Copolymers are substances created by chemically combining two or more simple compounds (monomers) into a long chain of molecules. The exact chemistry of this process and the specific molecular structures it creates can be manipulated to combine the desirable qualities of the simple compounds. For example, one compound may offer strength and resistance to weathering and chemicals, but not accept dyes well. When combined with another compound that can be readily dyed, the resulting copolymer offers the best qualities of both.

This was the exact process we used to fine-tune the attributes of the FRCP used in the Manix 2 Lightweight’s handle. The result was a lightweight, translucent material that could be injection molded into the handle’s desired shape while still achieving our demanding standards of strength and durability. This groundbreaking achievement was recognized at the 2010 Blade Show and International Cutlery Fair, where the Manix 2 Lightweight earned the “Most Innovative American Design” award.

The injection-molded handle literally revolutionized modern folding knife design. Spyderco is proud to have been one of the pioneers in that effort, and even prouder to continue the evolution of that technology with our broad selection of high-performance, lightweight cutting tools.


Shows

The Spyderco Crew was once again on the road this month, sharing our products and visiting with Spyderco followers at two major consumer trade shows.

The first was the Oregon Knife Show in Eugene, Oregon. Organized by the Oregon Knife Collector’s Association, this long-running show is wonderful opportunity to visit with old friends and make new ones, all while enjoying the very best aspects of America’s proud knife culture.

We then traveled to Indianapolis, Indiana, for the National Rifle Association’s Annual Meeting (NRAAM). This extraordinary three-day event attracted more than 800 exhibitors and tens of thousands of firearms enthusiasts from all over the country. Everyone who’s anyone in the firearms industry was there, and we were excited to visit with the many shooters and Second Amendment supporters who attended.


Mother's Day Gift Guide

Mother’s Day will be here before you know it, so the time to start shopping for that special gift is now! And what could be more special than a stylish, easy-to-carry cutting tool that she can use every day? Show the special Mom in your life how much you love her with one (or more) of these special gift suggestions from Spyderco.

Dragonfly 2 Perfectly sized to offer serious cutting performance in a compact package, the Dragonfly 2 is available in several stylish handle colors, including the bright yellow Dragonfly Salt.

Dragonfly Tattoo For a real fashion statement, this stainless steel-handled Dragonfly features a stunning multi-colored etching on the handle.

Ladybug This “lady” is the perfect companion for the other important ladies in your life. Available in a variety of colors and edge configurations, the Ladybug fits in a pocket, a purse, or even on a keychain.

Tri-Angle Sharpmaker No matter what Mom uses to cut—knives, scissors, potato peelers—make sure it’s performing the way it should by giving her the gift of sharp with the best-selling Tri-Angle Sharpmaker.


Op-Focus Seconds Sale

As April comes to a close, we are busily gearing up for a very special OpFocus® Seconds Sale event that will be held at the Spyderco Factory Outlet (SFO) on May 5th from 9:00AM-4:00PM. This sale is open only to military (active duty, retirees, and veterans), law enforcement, and first responder personnel and gives them an opportunity to purchase Spyderco factory seconds, closeouts and other select products at incredible discounts! Qualifying credentials must be presented at the door to be allowed entrance (ID card or, for non-retiree military veterans, a copy of your DD 214).

This special event is just one of the ways we at Spyderco express our thanks for the service and sacrifice of our country’s men and women in uniform.