Spydiewiki - User contributions [en]

Collectors club

2009-03-26T17:42:35Z

The Deacon:

The Spyderco collectors club is an offer to collectors of Spyderco knives.
The collectors club gives you the possibility to receive all Spyderco knives made, with your number on them.
There is of today 200 available numbers opposed to before 1997<ref>NOT Absolute information, but our best guess</ref> when only 100 numbers were available.
The numbers before 2000 were engraved the traditional way, sometime in 2001 that changed to laser engraving.<ref>We have established that the C13PBK Pro-grip had engraved numbers and the C71 Salsa had the number laser engraved. This leads us to believe that the change happened about 2000. If you have an earlier knife with the number lasered or a newer knife with the number engraved, please email us</ref>
The Variant- designator is believed to have been added when the club was increased from 100 to 200 numbers in 1997<ref>Again NOT Absolute information, but our best guess. If you have a knife from before 1997 with a Variant- designation, please e-mail us</ref>.

The Collector chooses a number from the list of open ones and then choose from the possibilities below.

As of today there's two possible ways to be a member of the collectors club:

1. All variants- The collector receives one of every variation of knife made by Spyderco. In practical terms this means that if Spyderco makes a knife with 2 types of handle and both types of handle in 3 different edges, the collector will receive 6 knives.

So, when the [[C106 Tasman Salt]] was released, the all variants collectors got the following:

[[Image:Tasman group shot.jpg|600px]]

2. [[Main]] models only- The collector receives new SKU's only, and the model of that SKU that Spyderco decides is the main model. Continuing with the picture above, the [[Main]] collectors would only get the Black SE model of the C106 as that was the main model.

Exceptions:

*The Mule- team knives had the MT01 (See [[MT Mule Team]] for details) in 52100- steel as the [[Main]], and then all collectors got to choose wheter to receive all the others. The others will then be marked with the collectornumber and a V for [[Variant]].

*The [[C92 Kopa]] had the Black Micarta C92BMP as main and all collectors got to chose if they wanted that single one or all variants.

Collectors knives will be numbered with a collector number 059 for instance, and then the variants will have a 059V if the collector chooses to receive all variants (as in the picture above).

==Oddities:==

*When Spyderco released the Hossom series of Fixed blades, the [[FB16 Jerry Hossom Forester]] was the main, and the remainding three knives in the series, although they had different SKU's, where considered variants due to the fact that they only differed in size.

*The [[C120 Mariner Salt]] was a [[Variant]] in the collector program even if it had a new [[SKU]]. This was because it was a reissue of an older model, namely the [[C02 Mariner]].

==References==

<references/>

===Categories===
[[category:Collectors club]]

C18 Wayne Goddard Jr.

2009-03-15T18:37:45Z

The Deacon: /* Designer */

text in process ...

==Appearance in catalogs==

==Designer==

Wayne Goddard

[[Wayne Goddard Makers mark]]

==History, mentionings etc. from the forums==

== Information from the Spyderco catalog on the web ==

== Variations ==

=== Variations of the C18 Wayne Goddard Jr.===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{tableheading}}'''[[Clip positions]]'''
{{tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C18PS
|valign="top" |Black [[Micarta]]
|valign="top" |[[PS]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 - 1998
|valign="top" |$116.95
|valign="top" |Most common version
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |?
|-
|valign="top" |C18S
|valign="top" |Black [[Micarta]]
|valign="top" |[[SE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Shown in 1993 brochure, does not appear in later catalogs
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |?
|-
|valign="top" |C18P
|valign="top" |Black [[Micarta]]
|valign="top" |[[PE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Limited Production "non-catalog" item
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |Yes
|}

== Most collectible variation ==

=== Questions regarding collecting the C18 ===

SE version appears in 1993 brochure, was it ever produced?

Was PE version made for and sold exclusively by Wayne Goddard? Seem to recall hearing this.

1994 Catalog shows a PS C18 with no steel markings, do specimens like that exist in any edge type?

== Technical information ==

Typical measurements (mm and grams) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

Typical measurements (Inches and ounces) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

== References ==
<references/>

== Pictures ==

<gallery>
Image:C18_goddard_ps_open.jpg|C18 Goddard, part serrated, open
Image:C18_goddard_pe_open.jpg|C18 Goddard, plain edge, open
Image:C18_goddard_clip_side.jpg|Clip side view of C18 Goddard
Image:C18_goddard_cc_number.jpg|Collectors Club number (019) on PE C18 Goddard
</gallery>

==Categories==

[[Category:Knives]]
[[Category:Folding knives]]
[[Category:ClipIts]]

C18 Wayne Goddard Jr.

2009-03-15T18:34:55Z

The Deacon: /* Pictures */

text in process ...

==Appearance in catalogs==

==Designer==

Wayne Goddard Jr.

[[Wayne Goddard Makers mark]]

==History, mentionings etc. from the forums==

== Information from the Spyderco catalog on the web ==

== Variations ==

=== Variations of the C18 Wayne Goddard Jr.===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{tableheading}}'''[[Clip positions]]'''
{{tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C18PS
|valign="top" |Black [[Micarta]]
|valign="top" |[[PS]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 - 1998
|valign="top" |$116.95
|valign="top" |Most common version
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |?
|-
|valign="top" |C18S
|valign="top" |Black [[Micarta]]
|valign="top" |[[SE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Shown in 1993 brochure, does not appear in later catalogs
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |?
|-
|valign="top" |C18P
|valign="top" |Black [[Micarta]]
|valign="top" |[[PE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Limited Production "non-catalog" item
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |Yes
|}

== Most collectible variation ==

=== Questions regarding collecting the C18 ===

SE version appears in 1993 brochure, was it ever produced?

Was PE version made for and sold exclusively by Wayne Goddard? Seem to recall hearing this.

1994 Catalog shows a PS C18 with no steel markings, do specimens like that exist in any edge type?

== Technical information ==

Typical measurements (mm and grams) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

Typical measurements (Inches and ounces) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

== References ==
<references/>

== Pictures ==

<gallery>
Image:C18_goddard_ps_open.jpg|C18 Goddard, part serrated, open
Image:C18_goddard_pe_open.jpg|C18 Goddard, plain edge, open
Image:C18_goddard_clip_side.jpg|Clip side view of C18 Goddard
Image:C18_goddard_cc_number.jpg|Collectors Club number (019) on PE C18 Goddard
</gallery>

==Categories==

[[Category:Knives]]
[[Category:Folding knives]]
[[Category:ClipIts]]

File:C18 goddard ps open.jpg

2009-03-15T18:29:16Z

The Deacon: /* Summary */

== Summary ==
C18 Goddard, part serrated, open. Not certain if the black fill in the lettering is original or was added by a previous owner.

== Copyright status ==

== Source ==
Paul Beretta's collection

File:C18 goddard ps open.jpg

2009-03-15T18:27:40Z

The Deacon: C18 Goddard, part serrated, open.

== Summary ==
C18 Goddard, part serrated, open.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C18 goddard pe open.jpg

2009-03-15T18:27:10Z

The Deacon: C18 Goddard, plain edged version.

== Summary ==
C18 Goddard, plain edged version.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C18 goddard clip side.jpg

2009-03-15T18:22:21Z

The Deacon: C18 Goddard, clip side view.

== Summary ==
C18 Goddard, clip side view.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C18 goddard cc number.jpg

2009-03-15T18:21:15Z

The Deacon: Detail of PE C18 blade, showing Collectors Club number (019)

== Summary ==
Detail of PE C18 blade, showing Collectors Club number (019)
== Copyright status ==

== Source ==
Paul Beretta's collection

C18 Wayne Goddard Jr.

2009-03-15T18:17:54Z

The Deacon: /* Variations of the C18 Wayne Goddard Jr. */

text in process ...

==Appearance in catalogs==

==Designer==

Wayne Goddard Jr.

[[Wayne Goddard Makers mark]]

==History, mentionings etc. from the forums==

== Information from the Spyderco catalog on the web ==

== Variations ==

=== Variations of the C18 Wayne Goddard Jr.===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{tableheading}}'''[[Clip positions]]'''
{{tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C18PS
|valign="top" |Black [[Micarta]]
|valign="top" |[[PS]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 - 1998
|valign="top" |$116.95
|valign="top" |Most common version
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |?
|-
|valign="top" |C18S
|valign="top" |Black [[Micarta]]
|valign="top" |[[SE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Shown in 1993 brochure, does not appear in later catalogs
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |?
|-
|valign="top" |C18P
|valign="top" |Black [[Micarta]]
|valign="top" |[[PE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Limited Production "non-catalog" item
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]]-[[TD]]
|valign="top" |Yes
|}

== Most collectible variation ==

=== Questions regarding collecting the C18 ===

SE version appears in 1993 brochure, was it ever produced?

Was PE version made for and sold exclusively by Wayne Goddard? Seem to recall hearing this.

1994 Catalog shows a PS C18 with no steel markings, do specimens like that exist in any edge type?

== Technical information ==

Typical measurements (mm and grams) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

Typical measurements (Inches and ounces) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

== References ==
<references/>

== Pictures ==

==Categories==

[[Category:Knives]]
[[Category:Folding knives]]
[[Category:ClipIts]]

C18 Wayne Goddard Jr.

2009-03-15T18:14:54Z

The Deacon: /* Most collectible variation */

text in process ...

==Appearance in catalogs==

==Designer==

Wayne Goddard Jr.

[[Wayne Goddard Makers mark]]

==History, mentionings etc. from the forums==

== Information from the Spyderco catalog on the web ==

== Variations ==

=== Variations of the C18 Wayne Goddard Jr.===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{tableheading}}'''[[Clip positions]]'''
{{tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C18PS
|valign="top" |Black [[Micarta]]
|valign="top" |[[PS]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 - 1998
|valign="top" |$116.95
|valign="top" |Most common version
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]][[TD]]
|valign="top" |?
|-
|valign="top" |C18S
|valign="top" |Black [[Micarta]]
|valign="top" |[[SE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Shown in 1993 brochure, does not appear in later catalogs
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]][[TD]]
|valign="top" |?
|-
|valign="top" |C18P
|valign="top" |Black [[Micarta]]
|valign="top" |[[PE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Limited Production "non-catalog" item
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]][[TD]]
|valign="top" |Yes
|}

== Most collectible variation ==

=== Questions regarding collecting the C18 ===

SE version appears in 1993 brochure, was it ever produced?

Was PE version made for and sold exclusively by Wayne Goddard? Seem to recall hearing this.

1994 Catalog shows a PS C18 with no steel markings, do specimens like that exist in any edge type?

== Technical information ==

Typical measurements (mm and grams) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

Typical measurements (Inches and ounces) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

== References ==
<references/>

== Pictures ==

==Categories==

[[Category:Knives]]
[[Category:Folding knives]]
[[Category:ClipIts]]

C18 Wayne Goddard Jr.

2009-03-15T18:08:31Z

The Deacon: /* Variations of the C18 Wayne Goddard Jr. */

text in process ...

==Appearance in catalogs==

==Designer==

Wayne Goddard Jr.

[[Wayne Goddard Makers mark]]

==History, mentionings etc. from the forums==

== Information from the Spyderco catalog on the web ==

== Variations ==

=== Variations of the C18 Wayne Goddard Jr.===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{tableheading}}'''[[Clip positions]]'''
{{tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C18PS
|valign="top" |Black [[Micarta]]
|valign="top" |[[PS]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 - 1998
|valign="top" |$116.95
|valign="top" |Most common version
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]][[TD]]
|valign="top" |?
|-
|valign="top" |C18S
|valign="top" |Black [[Micarta]]
|valign="top" |[[SE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Shown in 1993 brochure, does not appear in later catalogs
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]][[TD]]
|valign="top" |?
|-
|valign="top" |C18P
|valign="top" |Black [[Micarta]]
|valign="top" |[[PE]]
|valign="top" |[[GIN-1/G-2]]
|valign="top" |1992 ?
|valign="top" |$116.95
|valign="top" |Limited Production "non-catalog" item
|valign="top" |?
|valign="top" |[[Hollow sabre grind]]
|valign="top" |[[3- screw old standard clip]]
|valign="top" |[[RH]][[TD]]
|valign="top" |Yes
|}

== Most collectible variation ==

=== Questions regarding collecting the C18 ===

== Technical information ==

Typical measurements (mm and grams) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

Typical measurements (Inches and ounces) of the C18 Goddard:

{|{{Articletable}}
{{Tableheading}}'''SKU'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade length'''
{{Tableheading}}'''Cutting edge'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|align="right"|
|}

== References ==
<references/>

== Pictures ==

==Categories==

[[Category:Knives]]
[[Category:Folding knives]]
[[Category:ClipIts]]

File:C07CFPLclosed.jpg

2009-03-14T22:24:08Z

The Deacon: C07CFP Carbon Fiber Police, left hand plain edge version, clip side, closed.

== Summary ==
C07CFP Carbon Fiber Police, left hand plain edge version, clip side, closed.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C07CFPL open.jpg

2009-03-14T22:22:42Z

The Deacon: C07CF Police, left hand plain edge version, shown open.

== Summary ==
C07CF Police, left hand plain edge version, shown open.
== Copyright status ==

== Source ==
Paul Beretta's collection

C34 Jess Horn II

2009-03-14T18:51:38Z

The Deacon: New page: ==Jess Horn II== The C34 Jess Horn II was introduced in 1995. It was the second of three Jess Horn designs produced as collaboration models by Spyderco, the others being the [[C27 Je...

==Jess Horn II==

The C34 Jess Horn II was introduced in 1995. It was the second of three [[Jess Horn]] designs produced as collaboration models by Spyderco, the others being the [[C27 Jess Horn]] and the [[C38 Jess Horn Lightweight]]. The production versions have a [[Hollow sabre grind]] blade with a prominent [[Swedge]] grind and a black [[Micarta]] handle. In addition to the standard production version which was available in [[PE]] and [[SE]], several special versions of the C34 Jess Horn II were produced exclusively for [[A.G. Russell]]. Two of these models had the same dimensions as the production model, but featured [[Full Flat grind]] blades with a [[Swedge]] grind and different colors of micarta. The other three were of a reduced size and are unique, in that there was no production equivalent in any form. They are known as "Baby Horns" and were made in white [[Micarta]] with a [[Full Flat grind]] blade like those of the full size [[A.G. Russell]] Specials, and in black [[Micarta]] and all stainless steel with [[Hollow sabre grind]] blades like those of the production C34.

==Appearance in catalogs==

The C34 Jess Horn II first appeared in the 1997 pocket catalog. Prior to that, it was noted as "coming soon" in the 1995 Spyderco Retail Price Sheet.

==Designer==

[[Jess Horn]]

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from 1997 Pocket Catalog

''"For those who desire a custom design without the associated cost or lengthy wait, Spyderco introduces the second CLIPIT collaboration with Jess Horn. This refined pattern incorporates Jess' precise lines throughout. The scales are made of Micarta in a comfortable shape for everyday use, and the hand-finished premium stainless steel blade is formed in a spearpoint style. The elegant look of this gentleman's lightweight folder makes it worthy of carry for any occasion."''

==Variations==

Plain and serrated versions of the production model, plus the five A.G. Russell Specials noted above.

===Variations of the C34 Jess Horn II===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C34P
|valign="top" |Black Micarta
|valign="top" |[[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |1995- 1998
|valign="top" |119.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |?
|-
|valign="top" |C34S
|valign="top" |Black Micarta
|valign="top" |[[SE]]
|valign="top" |[[AUS-8]]
|valign="top" |1995- 1998
|valign="top" |119.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes
|-
|valign="top" |C34PBRGM
|valign="top" |Burgundy Micarta
|valign="top" |[[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |1995 - ?
|valign="top" |119.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Full Flat]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |?
|-
|valign="top" |C34WM
|valign="top" |White Micarta
|valign="top" |[[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |1995 - ?
|valign="top" |119.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Full Flat]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |?
|-
|valign="top" |AGSP-2W
|valign="top" |White Micarta Baby
|valign="top" |[[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |? - 1997
|valign="top" |?
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Full Flat]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |?
|-
|valign="top" |AGSP-2B
|valign="top" |Black Micarta Baby
|valign="top" |[[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |? - 1997
|valign="top" |?
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |?
|-
|valign="top" |AGSP-2S
|valign="top" |Stainless Steel
|valign="top" |[[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |? - 1997
|valign="top" |?
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |?
|}

== Most collectible variation ==

All five of the [[A.G. Russell]] Specials command higher prices than the production versions and, as with most collectible Spydercos, there is more collector interest in the

[[PE]] production version than in th [[SE]] production version.

== Questions regarding collecting the C34 Jess Horn II ==

Collectors Club numbered examples of at least two of the A.G. Russell Special variants exist, are there Collectors Club numbered specimens of all of them?
Production dates for the A.G. Russell Specials? The box for my black Baby Horn is dated 1/97.

==Technical Information==

Typical measurements (mm and grams) of the C34 Jess Horn II:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C34P
|align="right"|184mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|57g
|-
|align="right"|C34S
|align="right"|184mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|57g
|-
|align="right"|C34PBRGM
|align="right"|184mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|53g
|-
|align="right"|C34PWM
|align="right"|184mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|55g
|-
|align="right"|AGSP-2W
|align="right"|154mm
|align="right"|86mm
|align="right"|68mm
|align="right"|62mm
|align="right"|9mm
|align="right"|2.3mm
|align="right"|40g
|-
|align="right"|AGSP-2B
|align="right"|154mm
|align="right"|86mm
|align="right"|68mm
|align="right"|62mm
|align="right"|9mm
|align="right"|2.3mm
|align="right"|42g
|-
|align="right"|AGSP-2S
|align="right"|154mm
|align="right"|86mm
|align="right"|68mm
|align="right"|62mm
|align="right"|9mm
|align="right"|2.3mm
|align="right"|74g
|}

Typical measurements (Inches and ounces) of the C34 Jess Horn II:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C34P
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|2oz
|-
|align="right"|C34P
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|2oz
|-
|align="right"|C34PBRGM
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.9oz
|-
|align="right"|C34PWM
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.9oz
|-
|align="right"|AGSP-2W
|align="right"|6 1/16in
|align="right"|3 3/8in
|align="right"|2 11/16in
|align="right"|2 7/16in
|align="right"|11/32in
|align="right"|5/64in
|align="right"|1.4oz
|-
|align="right"|AGSP-2B
|align="right"|6 1/16in
|align="right"|3 3/8in
|align="right"|2 11/16in
|align="right"|2 7/16in
|align="right"|11/32in
|align="right"|5/64in
|align="right"|1.5oz
|-
|align="right"|AGSP-2S
|align="right"|6 1/16in
|align="right"|3 3/8in
|align="right"|2 11/16in
|align="right"|2 7/16in
|align="right"|11/32in
|align="right"|5/64in
|align="right"|2.6oz
|}

==References==

==Pictures==

<gallery>
Image:C34_horn_se.jpg|C34 Production Serrated
Image:C34_horn_pe.jpg|C34 Production Plain Edge
Image:C34_agr_white.jpg|C34 A. G. Russell Special White Micarta
Image:C34_agr_burgundy.jpg|C34 A. G. Russell Special Burgundy Micarta
Image:C34_clip_side.jpg|C34 Clip Side View
Image:C34_horn_closed.jpg|C34 Closed View
Image:C34_agr_baby_white.jpg|C34 A. G. Russell Special "Baby" White Micarta
Image:C34_agr_baby_black.jpg|C34 A. G. Russell Special "Baby" Black Micarta
Image:C34_baby_ss.jpg|C34 A. G. Russell Special "Baby" All Stainless Steel
Image:C34_all_babies.jpg|All A. G. Russell Special "Baby" Horns
Image:C34_all_variants.jpg|All C34 Variants
Image:C34_baby_compare.jpg|Comparison of Baby and full size C34 Jess Horn
</gallery>

Talk:C65 Bob Lum Chinese Folder

2009-03-13T12:57:06Z

The Deacon: New page: I seem to remember it being mentioned on the Forums that the Blue Lum Chinese was produced at the request of Boker, for distribution in Europe. Again, if memory serves, they only wanted a...

I seem to remember it being mentioned on the Forums that the Blue Lum Chinese was produced at the request of Boker, for distribution in Europe. Again, if memory serves, they only wanted about half a run, so Spyderco sold the balance. - Paul

C38 Jess Horn Lightweight

2009-03-13T12:49:13Z

The Deacon: /* Most collectible variation */

==Jess Horn Lightweight==

The C38 Jess Horn Lightweight was introduced in 1997. A Sprint Run in burgundy [[FRN]] was released in 2006.

==Appearance in catalogs==

The C38 Jess Horn Lightweight first appeared in the 1997 small consumer catalog. It remained in the catalog until 2000. The 2006 Sprint Run appeared in a Sprint Run brochure.

==Designer==

[[Jess Horn]]

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the 1997 consumer catalog...

''"This affordable folder from Spyderco and Jess Horn provides functionality in a custom design. The handle is made from lightweight fiberglass-reinforced nylon resin and includes the name "Jess Horn" in a continuous pattern across the front scale for grip. A black stainless steel clip with a gold Spyderco logo compliments the handle. The hollow-ground blade is formed in a spearpoint style, and the hole in the blade combines with a precision front lock to facilitate smooth one-hand opening action. A high-tech gentleman's knife, the Jess Horn lightweight is appropriate for daily use and special affairs."''

==Variations==

The original release of the C38 Jess Horn Lightweight was available in both plain and combo (part serrated) edge. The 2006 Sprint Run version was plain edge only.

===Variations of the C38 Jess Horn Lightweight===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C38
|valign="top" |Black FRN
|valign="top" |[[PS]], [[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |1997- 2000
|valign="top" |$69.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - [[PS]] [[Main]]
|-
|valign="top" |C38
|valign="top" |Burgundy FRN
|valign="top" |[[PE]]
|valign="top" |[[ZDP-189]]/[[420J2]] Laminate
|valign="top" |2006
|valign="top" |$104.95
|valign="top" |
|valign="top" |1200
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - [[Variant]]
|}

== Most collectible variation ==

There is collector interest in all versions, but as with most collectible Spyderco knives, the [[PE]] version is most favored by collectors.

== Questions regarding collecting the C38 Jess Horn Lightweight ==

==Technical Information==

Typical measurements (mm and grams) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|183mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|49g
|}

Typical measurements (Inches and ounces) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.75oz
|}

==References==

==Pictures==

<gallery>
Image:C38_horn_lgtwgt_ce_open.jpg|C38 Part Serrated
Image:C38_horn_lgtwgt_pe_open.jpg|C38 Plain
Image:C38_horn_lgtwgt_sprint.jpg|C38 Burgundy Sprint Run
Image:C38_horn_lgtwgt_clip_side.jpg|Clip side detail, note "dam" around clip mount
Image:C38_horn_handle_detail.jpg|Handle detail to show "Jess Horn" pattern in FRN
</gallery>

C38 Jess Horn Lightweight

2009-03-13T12:47:23Z

The Deacon: /* Most collectible variation */

==Jess Horn Lightweight==

The C38 Jess Horn Lightweight was introduced in 1997. A Sprint Run in burgundy [[FRN]] was released in 2006.

==Appearance in catalogs==

The C38 Jess Horn Lightweight first appeared in the 1997 small consumer catalog. It remained in the catalog until 2000. The 2006 Sprint Run appeared in a Sprint Run brochure.

==Designer==

[[Jess Horn]]

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the 1997 consumer catalog...

''"This affordable folder from Spyderco and Jess Horn provides functionality in a custom design. The handle is made from lightweight fiberglass-reinforced nylon resin and includes the name "Jess Horn" in a continuous pattern across the front scale for grip. A black stainless steel clip with a gold Spyderco logo compliments the handle. The hollow-ground blade is formed in a spearpoint style, and the hole in the blade combines with a precision front lock to facilitate smooth one-hand opening action. A high-tech gentleman's knife, the Jess Horn lightweight is appropriate for daily use and special affairs."''

==Variations==

The original release of the C38 Jess Horn Lightweight was available in both plain and combo (part serrated) edge. The 2006 Sprint Run version was plain edge only.

===Variations of the C38 Jess Horn Lightweight===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C38
|valign="top" |Black FRN
|valign="top" |[[PS]], [[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |1997- 2000
|valign="top" |$69.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - [[PS]] [[Main]]
|-
|valign="top" |C38
|valign="top" |Burgundy FRN
|valign="top" |[[PE]]
|valign="top" |[[ZDP-189]]/[[420J2]] Laminate
|valign="top" |2006
|valign="top" |$104.95
|valign="top" |
|valign="top" |1200
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - [[Variant]]
|}

== Most collectible variation ==

As with most collectible Spyderco knives, the [[PE]] version is most favored by collectors.

== Questions regarding collecting the C38 Jess Horn Lightweight ==

==Technical Information==

Typical measurements (mm and grams) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|183mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|49g
|}

Typical measurements (Inches and ounces) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.75oz
|}

==References==

==Pictures==

<gallery>
Image:C38_horn_lgtwgt_ce_open.jpg|C38 Part Serrated
Image:C38_horn_lgtwgt_pe_open.jpg|C38 Plain
Image:C38_horn_lgtwgt_sprint.jpg|C38 Burgundy Sprint Run
Image:C38_horn_lgtwgt_clip_side.jpg|Clip side detail, note "dam" around clip mount
Image:C38_horn_handle_detail.jpg|Handle detail to show "Jess Horn" pattern in FRN
</gallery>

C38 Jess Horn Lightweight

2009-03-13T12:46:57Z

The Deacon: /* Variations of the C38 Jess Horn Lightweight */

==Jess Horn Lightweight==

The C38 Jess Horn Lightweight was introduced in 1997. A Sprint Run in burgundy [[FRN]] was released in 2006.

==Appearance in catalogs==

The C38 Jess Horn Lightweight first appeared in the 1997 small consumer catalog. It remained in the catalog until 2000. The 2006 Sprint Run appeared in a Sprint Run brochure.

==Designer==

[[Jess Horn]]

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the 1997 consumer catalog...

''"This affordable folder from Spyderco and Jess Horn provides functionality in a custom design. The handle is made from lightweight fiberglass-reinforced nylon resin and includes the name "Jess Horn" in a continuous pattern across the front scale for grip. A black stainless steel clip with a gold Spyderco logo compliments the handle. The hollow-ground blade is formed in a spearpoint style, and the hole in the blade combines with a precision front lock to facilitate smooth one-hand opening action. A high-tech gentleman's knife, the Jess Horn lightweight is appropriate for daily use and special affairs."''

==Variations==

The original release of the C38 Jess Horn Lightweight was available in both plain and combo (part serrated) edge. The 2006 Sprint Run version was plain edge only.

===Variations of the C38 Jess Horn Lightweight===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C38
|valign="top" |Black FRN
|valign="top" |[[PS]], [[PE]]
|valign="top" |[[AUS-8]]
|valign="top" |1997- 2000
|valign="top" |$69.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - [[PS]] [[Main]]
|-
|valign="top" |C38
|valign="top" |Burgundy FRN
|valign="top" |[[PE]]
|valign="top" |[[ZDP-189]]/[[420J2]] Laminate
|valign="top" |2006
|valign="top" |$104.95
|valign="top" |
|valign="top" |1200
|valign="top" |[[Hollow sabre grind]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - [[Variant]]
|}

== Most collectible variation ==

As with most collectible Spyderco knives, the PE version is most favored by collectors.

== Questions regarding collecting the C38 Jess Horn Lightweight ==

==Technical Information==

Typical measurements (mm and grams) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|183mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|49g
|}

Typical measurements (Inches and ounces) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.75oz
|}

==References==

==Pictures==

<gallery>
Image:C38_horn_lgtwgt_ce_open.jpg|C38 Part Serrated
Image:C38_horn_lgtwgt_pe_open.jpg|C38 Plain
Image:C38_horn_lgtwgt_sprint.jpg|C38 Burgundy Sprint Run
Image:C38_horn_lgtwgt_clip_side.jpg|Clip side detail, note "dam" around clip mount
Image:C38_horn_handle_detail.jpg|Handle detail to show "Jess Horn" pattern in FRN
</gallery>

C38 Jess Horn Lightweight

2009-03-13T12:39:39Z

The Deacon: /* Jess Horn Lightweight */

==Jess Horn Lightweight==

The C38 Jess Horn Lightweight was introduced in 1997. A Sprint Run in burgundy [[FRN]] was released in 2006.

==Appearance in catalogs==

The C38 Jess Horn Lightweight first appeared in the 1997 small consumer catalog. It remained in the catalog until 2000. The 2006 Sprint Run appeared in a Sprint Run brochure.

==Designer==

[[Jess Horn]]

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the 1997 consumer catalog...

''"This affordable folder from Spyderco and Jess Horn provides functionality in a custom design. The handle is made from lightweight fiberglass-reinforced nylon resin and includes the name "Jess Horn" in a continuous pattern across the front scale for grip. A black stainless steel clip with a gold Spyderco logo compliments the handle. The hollow-ground blade is formed in a spearpoint style, and the hole in the blade combines with a precision front lock to facilitate smooth one-hand opening action. A high-tech gentleman's knife, the Jess Horn lightweight is appropriate for daily use and special affairs."''

==Variations==

The original release of the C38 Jess Horn Lightweight was available in both plain and combo (part serrated) edge. The 2006 Sprint Run version was plain edge only.

===Variations of the C38 Jess Horn Lightweight===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C38
|valign="top" |Black FRN
|valign="top" |[[PS]], [[PE]]
|valign="top" |AUS-8
|valign="top" |1997- 2000
|valign="top" |$69.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|-
|valign="top" |C38
|valign="top" |Burgundy FRN
|valign="top" |[[PE]]
|valign="top" |ZDP-189/420J2 Laminate
|valign="top" |2006
|valign="top" |$104.95
|valign="top" |
|valign="top" |1200
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|}

== Most collectible variation ==

As with most collectible Spyderco knives, the PE version is most favored by collectors.

== Questions regarding collecting the C38 Jess Horn Lightweight ==

==Technical Information==

Typical measurements (mm and grams) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|183mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|49g
|}

Typical measurements (Inches and ounces) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.75oz
|}

==References==

==Pictures==

<gallery>
Image:C38_horn_lgtwgt_ce_open.jpg|C38 Part Serrated
Image:C38_horn_lgtwgt_pe_open.jpg|C38 Plain
Image:C38_horn_lgtwgt_sprint.jpg|C38 Burgundy Sprint Run
Image:C38_horn_lgtwgt_clip_side.jpg|Clip side detail, note "dam" around clip mount
Image:C38_horn_handle_detail.jpg|Handle detail to show "Jess Horn" pattern in FRN
</gallery>

C38 Jess Horn Lightweight

2009-03-13T12:38:05Z

The Deacon: /* Jess Horn Lightweight */

==Jess Horn Lightweight==

The C38 Jess Horn Lightweight was introduced in 1997. A [[Sprint Run]] in burgundy [[FRN]] was released in 2006.

==Appearance in catalogs==

The C38 Jess Horn Lightweight first appeared in the 1997 small consumer catalog. It remained in the catalog until 2000. The 2006 Sprint Run appeared in a Sprint Run brochure.

==Designer==

[[Jess Horn]]

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the 1997 consumer catalog...

''"This affordable folder from Spyderco and Jess Horn provides functionality in a custom design. The handle is made from lightweight fiberglass-reinforced nylon resin and includes the name "Jess Horn" in a continuous pattern across the front scale for grip. A black stainless steel clip with a gold Spyderco logo compliments the handle. The hollow-ground blade is formed in a spearpoint style, and the hole in the blade combines with a precision front lock to facilitate smooth one-hand opening action. A high-tech gentleman's knife, the Jess Horn lightweight is appropriate for daily use and special affairs."''

==Variations==

The original release of the C38 Jess Horn Lightweight was available in both plain and combo (part serrated) edge. The 2006 Sprint Run version was plain edge only.

===Variations of the C38 Jess Horn Lightweight===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C38
|valign="top" |Black FRN
|valign="top" |[[PS]], [[PE]]
|valign="top" |AUS-8
|valign="top" |1997- 2000
|valign="top" |$69.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|-
|valign="top" |C38
|valign="top" |Burgundy FRN
|valign="top" |[[PE]]
|valign="top" |ZDP-189/420J2 Laminate
|valign="top" |2006
|valign="top" |$104.95
|valign="top" |
|valign="top" |1200
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|}

== Most collectible variation ==

As with most collectible Spyderco knives, the PE version is most favored by collectors.

== Questions regarding collecting the C38 Jess Horn Lightweight ==

==Technical Information==

Typical measurements (mm and grams) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|183mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|49g
|}

Typical measurements (Inches and ounces) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.75oz
|}

==References==

==Pictures==

<gallery>
Image:C38_horn_lgtwgt_ce_open.jpg|C38 Part Serrated
Image:C38_horn_lgtwgt_pe_open.jpg|C38 Plain
Image:C38_horn_lgtwgt_sprint.jpg|C38 Burgundy Sprint Run
Image:C38_horn_lgtwgt_clip_side.jpg|Clip side detail, note "dam" around clip mount
Image:C38_horn_handle_detail.jpg|Handle detail to show "Jess Horn" pattern in FRN
</gallery>

C38 Jess Horn Lightweight

2009-03-13T12:37:27Z

The Deacon: /* Designer */

==Jess Horn Lightweight==

The C38 Jess Horn Lightweight was introduced in 1997. A Sprint Run in burgundy FRN was released in 2006.

==Appearance in catalogs==

The C38 Jess Horn Lightweight first appeared in the 1997 small consumer catalog. It remained in the catalog until 2000. The 2006 Sprint Run appeared in a Sprint Run brochure.

==Designer==

[[Jess Horn]]

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the 1997 consumer catalog...

''"This affordable folder from Spyderco and Jess Horn provides functionality in a custom design. The handle is made from lightweight fiberglass-reinforced nylon resin and includes the name "Jess Horn" in a continuous pattern across the front scale for grip. A black stainless steel clip with a gold Spyderco logo compliments the handle. The hollow-ground blade is formed in a spearpoint style, and the hole in the blade combines with a precision front lock to facilitate smooth one-hand opening action. A high-tech gentleman's knife, the Jess Horn lightweight is appropriate for daily use and special affairs."''

==Variations==

The original release of the C38 Jess Horn Lightweight was available in both plain and combo (part serrated) edge. The 2006 Sprint Run version was plain edge only.

===Variations of the C38 Jess Horn Lightweight===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C38
|valign="top" |Black FRN
|valign="top" |[[PS]], [[PE]]
|valign="top" |AUS-8
|valign="top" |1997- 2000
|valign="top" |$69.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|-
|valign="top" |C38
|valign="top" |Burgundy FRN
|valign="top" |[[PE]]
|valign="top" |ZDP-189/420J2 Laminate
|valign="top" |2006
|valign="top" |$104.95
|valign="top" |
|valign="top" |1200
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|}

== Most collectible variation ==

As with most collectible Spyderco knives, the PE version is most favored by collectors.

== Questions regarding collecting the C38 Jess Horn Lightweight ==

==Technical Information==

Typical measurements (mm and grams) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|183mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|49g
|}

Typical measurements (Inches and ounces) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.75oz
|}

==References==

==Pictures==

<gallery>
Image:C38_horn_lgtwgt_ce_open.jpg|C38 Part Serrated
Image:C38_horn_lgtwgt_pe_open.jpg|C38 Plain
Image:C38_horn_lgtwgt_sprint.jpg|C38 Burgundy Sprint Run
Image:C38_horn_lgtwgt_clip_side.jpg|Clip side detail, note "dam" around clip mount
Image:C38_horn_handle_detail.jpg|Handle detail to show "Jess Horn" pattern in FRN
</gallery>

C38 Jess Horn Lightweight

2009-03-13T12:36:07Z

The Deacon: /* Variations of the C38 Jess Horn Lightweight */

==Jess Horn Lightweight==

The C38 Jess Horn Lightweight was introduced in 1997. A Sprint Run in burgundy FRN was released in 2006.

==Appearance in catalogs==

The C38 Jess Horn Lightweight first appeared in the 1997 small consumer catalog. It remained in the catalog until 2000. The 2006 Sprint Run appeared in a Sprint Run brochure.

==Designer==

Jess Horn

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the 1997 consumer catalog...

''"This affordable folder from Spyderco and Jess Horn provides functionality in a custom design. The handle is made from lightweight fiberglass-reinforced nylon resin and includes the name "Jess Horn" in a continuous pattern across the front scale for grip. A black stainless steel clip with a gold Spyderco logo compliments the handle. The hollow-ground blade is formed in a spearpoint style, and the hole in the blade combines with a precision front lock to facilitate smooth one-hand opening action. A high-tech gentleman's knife, the Jess Horn lightweight is appropriate for daily use and special affairs."''

==Variations==

The original release of the C38 Jess Horn Lightweight was available in both plain and combo (part serrated) edge. The 2006 Sprint Run version was plain edge only.

===Variations of the C38 Jess Horn Lightweight===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C38
|valign="top" |Black FRN
|valign="top" |[[PS]], [[PE]]
|valign="top" |AUS-8
|valign="top" |1997- 2000
|valign="top" |$69.95
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|-
|valign="top" |C38
|valign="top" |Burgundy FRN
|valign="top" |[[PE]]
|valign="top" |ZDP-189/420J2 Laminate
|valign="top" |2006
|valign="top" |$104.95
|valign="top" |
|valign="top" |1200
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|}

== Most collectible variation ==

As with most collectible Spyderco knives, the PE version is most favored by collectors.

== Questions regarding collecting the C38 Jess Horn Lightweight ==

==Technical Information==

Typical measurements (mm and grams) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|183mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|49g
|}

Typical measurements (Inches and ounces) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.75oz
|}

==References==

==Pictures==

<gallery>
Image:C38_horn_lgtwgt_ce_open.jpg|C38 Part Serrated
Image:C38_horn_lgtwgt_pe_open.jpg|C38 Plain
Image:C38_horn_lgtwgt_sprint.jpg|C38 Burgundy Sprint Run
Image:C38_horn_lgtwgt_clip_side.jpg|Clip side detail, note "dam" around clip mount
Image:C38_horn_handle_detail.jpg|Handle detail to show "Jess Horn" pattern in FRN
</gallery>

C38 Jess Horn Lightweight

2009-03-13T11:24:24Z

The Deacon: New page: ==Jess Horn Lightweight== The C38 Jess Horn Lightweight was introduced in 1997. A Sprint Run in burgundy FRN was released in 2006. ==Appearance in catalogs== The C38 Jess Horn Lightwei...

==Jess Horn Lightweight==

The C38 Jess Horn Lightweight was introduced in 1997. A Sprint Run in burgundy FRN was released in 2006.

==Appearance in catalogs==

The C38 Jess Horn Lightweight first appeared in the 1997 small consumer catalog. It remained in the catalog until 2000. The 2006 Sprint Run appeared in a Sprint Run brochure.

==Designer==

Jess Horn

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the 1997 consumer catalog...

''"This affordable folder from Spyderco and Jess Horn provides functionality in a custom design. The handle is made from lightweight fiberglass-reinforced nylon resin and includes the name "Jess Horn" in a continuous pattern across the front scale for grip. A black stainless steel clip with a gold Spyderco logo compliments the handle. The hollow-ground blade is formed in a spearpoint style, and the hole in the blade combines with a precision front lock to facilitate smooth one-hand opening action. A high-tech gentleman's knife, the Jess Horn lightweight is appropriate for daily use and special affairs."''

==Variations==

The original release of the C38 Jess Horn Lightweight was available in both plain and combo (part serrated) edge. The 2006 Sprint Run version was plain edge only.

===Variations of the C38 Jess Horn Lightweight===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C38
|valign="top" |Black FRN
|valign="top" |[[PS]], [[PE]]
|valign="top" |AUS-8
|valign="top" |1997- 2000
|valign="top" |?
|valign="top" |
|valign="top" |Unknown
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|-
|valign="top" |C38
|valign="top" |Burgundy FRN
|valign="top" |[[PE]]
|valign="top" |ZDP-189/420J2 Laminate
|valign="top" |2006
|valign="top" |$104.95
|valign="top" |
|valign="top" |1200
|valign="top" |[[Hollow]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TU]]
|valign="top" |Yes - CE version
|}

== Most collectible variation ==

As with most collectible Spyderco knives, the PE version is most favored by collectors.

== Questions regarding collecting the C38 Jess Horn Lightweight ==

==Technical Information==

Typical measurements (mm and grams) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|183mm
|align="right"|102mm
|align="right"|79mm
|align="right"|73mm
|align="right"|11mm
|align="right"|2.4mm
|align="right"|49g
|}

Typical measurements (Inches and ounces) of the C38 Jess Horn Lightweight:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C38 Jess Horn Lightweight
|align="right"|7 1/4in
|align="right"|4in
|align="right"|3 1/8in
|align="right"|2 7/8in
|align="right"|7/16in
|align="right"|3/32in
|align="right"|1.75oz
|}

==References==

==Pictures==

<gallery>
Image:C38_horn_lgtwgt_ce_open.jpg|C38 Part Serrated
Image:C38_horn_lgtwgt_pe_open.jpg|C38 Plain
Image:C38_horn_lgtwgt_sprint.jpg|C38 Burgundy Sprint Run
Image:C38_horn_lgtwgt_clip_side.jpg|Clip side detail, note "dam" around clip mount
Image:C38_horn_handle_detail.jpg|Handle detail to show "Jess Horn" pattern in FRN
</gallery>

File:C38 horn lgtwgt clip side.jpg

2009-03-13T11:12:49Z

The Deacon: Clip side view of C38 Jess Horn Lightweight. Note the raised lip around the end of the clip.

== Summary ==
Clip side view of C38 Jess Horn Lightweight. Note the raised lip around the end of the clip.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C38 horn lgtwgt pe open.jpg

2009-03-13T11:11:13Z

The Deacon: Original plain edge C38 Jess Horn Lightweight.

== Summary ==
Original plain edge C38 Jess Horn Lightweight.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C38 horn lgtwgt ce open.jpg

2009-03-13T11:10:26Z

The Deacon: Original combo edge (part serrated) C38 Jess Horn Lightweight.

== Summary ==
Original combo edge (part serrated) C38 Jess Horn Lightweight.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C38 horn lgtwgt sprint.jpg

2009-03-13T11:08:41Z

The Deacon: Burgundy FRN ZDP-189/420J2 Sprint Run C38 Jess Horn Lightweight.

== Summary ==
Burgundy [[FRN]] ZDP-189/420J2 Sprint Run C38 Jess Horn Lightweight.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C38 horn handle detail.jpg

2009-03-13T11:06:40Z

The Deacon: Burgundy FRN Sprint Run C38 Jess Horn Lightweight closed. Note the use of Jess Horn's name in a repeating pattern as the texturing of the FRN handle.

== Summary ==
Burgundy FRN Sprint Run C38 Jess Horn Lightweight closed. Note the use of Jess Horn's name in a repeating pattern as the texturing of the FRN handle.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 horn se.jpg

2009-03-13T11:04:17Z

The Deacon: Production serrated edged version of the C34 Jess Horn II

== Summary ==
Production serrated edged version of the C34 Jess Horn II
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 horn pe.jpg

2009-03-13T11:03:38Z

The Deacon: Production plain edged version of the C34 Jess Horn II

== Summary ==
Production plain edged version of the C34 Jess Horn II
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 horn closed.jpg

2009-03-13T11:02:36Z

The Deacon: C34 Jess Horn II, closed.

== Summary ==
C34 Jess Horn II, closed.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 clip side.jpg

2009-03-13T11:01:34Z

The Deacon: Clip side view of C34 Jess Horn II.

== Summary ==
Clip side view of C34 Jess Horn II.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 all variants.jpg

2009-03-13T11:00:35Z

The Deacon: Group shot of all versions of the C34 Jess Horn II and "Baby Horn".

== Summary ==
Group shot of all versions of the C34 Jess Horn II and "Baby Horn".
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 all babies.jpg

2009-03-13T10:58:24Z

The Deacon: Clip side view of all three versions of the C34 "Baby Horn".

== Summary ==
Clip side view of all three versions of the C34 "Baby Horn".
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 baby compare.jpg

2009-03-13T10:56:36Z

The Deacon: Comparison shot of full size and "Baby Horn" versions of the C34 Jess Horn II. Perhaps the most easy to spot difference is the distance between the rearmost pin and the lanyard hole.

== Summary ==
Comparison shot of full size and "Baby Horn" versions of the C34 Jess Horn II. Perhaps the most easy to spot difference is the distance between the rearmost pin and the lanyard hole.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 agr white.jpg

2009-03-13T10:54:05Z

The Deacon: C34 Jess Horn II in White Micarta produced exclusively for A.G. Russell.

== Summary ==
C34 Jess Horn II in White Micarta produced exclusively for A.G. Russell.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 agr burgundy.jpg

2009-03-13T10:52:48Z

The Deacon: C34 Jess Horn II in Burgundy Micarta produced exclusively for A.G. Russell.

== Summary ==
C34 Jess Horn II in Burgundy Micarta produced exclusively for A.G. Russell.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 baby ss.jpg

2009-03-13T10:51:02Z

The Deacon: All stainless steel C34 "Baby Horn" produced exclusively for A.G. Russell.

== Summary ==
All stainless steel C34 "Baby Horn" produced exclusively for A.G. Russell.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 agr baby white.jpg

2009-03-13T10:49:46Z

The Deacon: White Micarta C34 "Baby Horn" produced exclusively for A.G. Russell.

== Summary ==
White Micarta C34 "Baby Horn" produced exclusively for A.G. Russell.
== Copyright status ==
Paul Beretta's collection
== Source ==

File:C34 agr baby black.jpg

2009-03-13T10:48:02Z

The Deacon: /* Summary */

== Summary ==
Black Micarta C34 "Baby Horn" produced exclusively for A.G. Russell.

== Copyright status ==

== Source ==
Paul Beretta's collection

File:C34 agr baby black.jpg

2009-03-13T10:46:16Z

The Deacon: A.G. Russel Special Black Micarta "Baby Horn"

== Summary ==
A.G. Russel Special Black Micarta "Baby Horn"
== Copyright status ==

== Source ==
Paul Beretta's collection

C27 Jess Horn

2009-03-11T15:41:56Z

The Deacon: New page: ==Jess Horn== The C27 Jess Horn was a collaboration with Jess Horn, one of America's premier custom knife makers and was produced for Spyderco by Moki in Japan. It holds several distinct...

==Jess Horn==

The C27 Jess Horn was a collaboration with Jess Horn, one of America's premier custom knife makers and was produced for Spyderco by Moki in Japan. It holds several distinctions. It is the only Spyderco branded folder which does not use the trademark "Spyderhole" round hole opener. Instead it uses an alternate impementation of Spyderco's original patent which consists of a pair of trapezoidal depressions, one on each side of the blade to allow one hand opening. At the time of its introduction, it was the most expensive single folder Spyderco had produced to that date. It is also the only Spyderco branded folder offered with a serrated edge which does not use Spyderco's trademark "Spyderedge" serrations but, instead, uses small serrations of equal size. Finally, it is the only Spdyerco model where a serrated version was produced but the plain edged version was the "main" Collectors Club piece.

==Appearance in catalogs==

The C27 Jess Horn first appeared in the 1994 Spyderco catalog/brochure. It remained in the catalog until 1998.

==Designer==

Jess Horn

==History, mentionings from the forums, etc.==

== Information from the Spyderco catalog on the web ==

Description from the original 1994 "Welecome to the World of Spyderco" brochure...

''"Unlike most CLIPiTs, the Jess Horn model was not designed with a thumb-hole in the blade. It can, however, be easily opened with one hand by using hte trapezoid indent. The handle is embellished with a "jigged bone" that is specially made for Mr. Horn. The front lock incorporates a spring and spacer between the scales as one polished piece. The entire knife reflects Jess's custom style and signature. This is one of the world's finest custom manufactured knives. From the jigged bone handle to the meticulously sculpted stainless clip, this folder boasts precise fit and finish that is second to none in manufacturing. Efen the lanyard hole features attention to detail - it's chamfered and lined. This collaboration between Jess Horn and Spyderco represents a superb value for collectors considering a Jess Horn custom would equal three to four times the cost."''

Cost, at that time was $349.95

==Variations==

As mentioned earlier, the C27 Jess Horn was built in Japan, by Moki. It was available in both plain and serrated edge. While there are no "variants" per se, there are a number of variations in marking. The Collectors Club numbered pieces were numbered on the left bolster and at least some of them do not carry Jess Horn's signature engraved on the blade. Higher numbered pieces were numbered on the blade. Some un-numbered pieces also were produced. Finally, there were some "leftovers" from this run sold by Moki under their own label without the Spyderco name on the blade tang.

===Variations of the C27 Jess Horn===

{|{{Articletable}}
{{Tableheading}}'''[[SKU]]'''
{{Tableheading}}'''[[Handle]]'''
{{Tableheading}}'''[[Edge|Edge(s)]]'''
{{Tableheading}}'''[[Steel]]'''
{{Tableheading}}'''[[From/To]]'''
{{Tableheading}}'''[[MSRP]]'''
{{Tableheading}}'''[[Note]]'''
{{Tableheading}}'''[[Number made]]'''
{{Tableheading}}'''[[Grind]]'''
{{Tableheading}}'''[[Clip]]'''
{{Tableheading}}'''[[Clip positions]]'''
{{Tableheading}}'''[[Collectors club]]'''
|-
|valign="top" |C27
|valign="top" |Jigged Bone scales Stainless Steel front bolsters and liners
|valign="top" |[[SE]], [[PE]]
|valign="top" |ATS-34
|valign="top" |1994- 1998
|valign="top" |$349.95 (1994)
|valign="top" |
|valign="top" |1200 (600 ea PE/SE)
|valign="top" |[[Full Flat]]
|valign="top" |machined stainless steel 3 screw
|valign="top" |[[TD]]
|valign="top" |Yes - PE version
|}

== Most collectible variation ==

As with most collectible Spyderco knives, the PE version is most favored by collectors.

== Questions regarding collecting the C27 Jess Horn ==

Are there Collectors Club numbered SE knives?
Are there PE Collectors Club numbered knives "signed" by Jess Horn

==Technical Information==

Typical measurements (mm and grams) of the C27 Jess Horn:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C27 Jess Horn
|align="right"|152mm
|align="right"|89mm
|align="right"|67mm
|align="right"|60mm
|align="right"|no hole, trapezoidal indent
|align="right"|2.4mm
|align="right"|69g
|}

Typical measurements (Inches and ounces) of the C27 Jess Horn:

{|{{Articletable}}
{{Tableheading}}'''Variation'''
{{Tableheading}}'''Length overall'''
{{Tableheading}}'''Length closed'''
{{Tableheading}}'''Length blade'''
{{Tableheading}}'''Length edge'''
{{Tableheading}}'''Hole Ø'''
{{Tableheading}}'''Blade thickness'''
{{Tableheading}}'''Weight'''
|-
|align="right"|C27 Jess Horn
|align="right"|6in
|align="right"|3 1/2in
|align="right"|2 5/8in
|align="right"|2 3/8in
|align="right"|no hole, trapezoidal indent
|align="right"|3/32in
|align="right"|2.4oz
|}

==References==

==Pictures==

<gallery>
Image:C27_jess_horn_pe_open_left.jpg|Collectors Club numbered (019) on bolster, no signature on blade.
Image:C27_jess_horn_se_open_left.jpg|Serrated version, signed and numbered (585) blade. Note serration pattern.
Image:C27_jess_horn_pe_unnumbered_open_left2.jpg|Unnumbered plain edge, signed blade.
Image:C27_jess_horn_pe_open_right.jpg|Clip side, open
Image:C27_jess_horn_closed_right.jpg|Closed, clip side, note recessed Allen head clip screws.
Image:C27_jess_horn_clip_detail.jpg|Detail edge view of the machined stainless steel clip
Image:C27_jess_horn_backspacer_detail.jpg|Interior view to show one piece combination backspacer and lock spring.
</gallery>

File:C27 jess horn se open left.jpg

2009-03-11T15:23:00Z

The Deacon: Numbered, serrated edge C27.

== Summary ==
Numbered, serrated edge C27.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C27 jess horn pe unnumbered open left2.jpg

2009-03-11T15:22:00Z

The Deacon: Unnumbered plain edge C27.

== Summary ==
Unnumbered plain edge C27.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C27 jess horn pe open right.jpg

2009-03-11T15:20:48Z

The Deacon: Clip side view, open.

== Summary ==
Clip side view, open.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C27 jess horn pe open left.jpg

2009-03-11T15:19:20Z

The Deacon: Plain edge Collectors Club numbered (019) C27 with no signature.

== Summary ==
Plain edge Collectors Club numbered (019) C27 with no signature.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C27 jess horn closed right.jpg

2009-03-11T15:17:58Z

The Deacon: /* Summary */

== Summary ==
Closed view, to show clip. Note the recessed clip screws.

== Copyright status ==

== Source ==
Paul Beretta's collection

File:C27 jess horn closed right.jpg

2009-03-11T15:17:02Z

The Deacon: Closed view, to show clip.

== Summary ==
Closed view, to show clip.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C27 jess horn clip detail.jpg

2009-03-11T15:16:06Z

The Deacon: Solid, machined, stainless steel clip.

== Summary ==
Solid, machined, stainless steel clip.
== Copyright status ==

== Source ==
Paul Beretta's collection

File:C27 jess horn backspacer detail.jpg

2009-03-11T15:13:54Z

The Deacon: Combination Back spacer and lock spring.

== Summary ==
Combination Back spacer and lock spring.
== Copyright status ==

== Source ==
Paul Beretta's collection