C70 A.T.R.

From Spydiewiki
Jump to navigationJump to search

>>>THIS PAGE IS CURRENTLY IN CREATION<<<


The C70 A.T.R or At The Ready

Appearance in catalogs

The C70 A.T.R. appears in the following catalogs:

  • 2003 Spyderco Product Guide (C70)
  • 2004 Spyderco Product Guide (C70)
  • 2005 Spyderco Product Guide (C70TI, C70SS)
  • 2006 Spyderco Product Guide (C70SS, C70BK)

Designer

Sal Glesser [1]

History, mentionings from the forums etc.

On the Spyderco forums:

Information from the Spyderco catalog on the web

C70 A.T.R.

A.T.R. is an acronym for At The Ready -- and it is. Spyderco showcases several technologically advanced features offered to the cutlery world in this high-end tactical folder. Voted 'Knife of The Year 2003' by Knives Illustrated magazine.

We precision machine a fistful of 6AL4V titanium into a handle then drilled it full of holes. The holes lessen weight, doubling as indexing divots in order to rotate the folder from one grip position to another. A second set of holes machined from the contoured pocket clip line up with the handle's holes for balanced indexing. Curvy expansions on opposite ends of the handle flare outward into a choil and a pinky shelf insuring the hand remains gripped on the folder in any draw. Rated suitable for heavy or MBC-use, the Compression Lock is integrated, actually part of the handle scale. The CPM S30V blade is hollow-ground with a sloping unsharpened swedge down the spine. As the tip sweeps down, the belly sweeps up to meet it, making a thick substantial tip for aggressive penetration and cutting. Seated above the Spyderco Round Hole is a Cobra Hood. While deploying the blade the thumb naturally positions itself under the overhang of the Cobra Hood properly positioning the thumb pad over the hole by feel (rapid deployment). Once opened, the textured Cobra Hood functions as a support/control seat for the thumb while cutting. Clip fastens into pre-tapped positioning holes for tip-up, left/right-hand carry.

The C70 A.T.R. in Spyderco's online catalog.

Variations

The C70 A.T.R. features a:

  • Cobra hood
  • A symetrical 'dagger-type' grind with a fin or hump near the tip.
  • Integral compression lock
  • Holes in the handle and clip to allow the user to rotate the knife into different grips


C70 A.T.R.

SKU Handle Edge Steel From/To MSRP Note Number made Grind Clip Clip positions Collectors club
C70TI Titanium PE, SE CPM-S30V Regular production Silver 3-hole custom clip with "SAL" makers mark. RH, LH, TU Main
C70 Steel PE, SE CPM-S30V Regular production Silver 3-hole custom clip with "SAL" makers mark. RH, LH, TU
C70 Steel, All Black PE, SE CPM-S30V Made in Golden, CO. Regular production Black 3-hole custom clip with "SAL" makers mark. RH, LH, TU

C70 A.T.R. 2

SKU Handle Edge Steel From/To MSRP Note Number made Grind Clip Clip positions Collectors club
C70GP2 Black G-10 PE CPM-S30V Regular production Black Hourglass TU Main

Most collectible variation

Technical information

Measurements (mm and grams) of the C70 A.T.R.

Variations Length overall Length closed Length blade Length edge Hole Ø Blade thickness Weight
A.T.R. Titanium mm mm mm mm 14 mm mm g
A.T.R. mm mm mm mm mm mm g
A.T.R. 2 mm mm mm mm ? mm g

Measurements (inches and ounces) of the C70 A.T.R.:

Variations Length overall Length closed Length blade Length edge Hole Ø Blade thickness Weight
A.T.R. Titanium " " " " " oz
A.T.R. " " " " " oz
A.T.R. 2 " " " " ? " oz

References

  1. Sal Glesser's original comment can be found on Spyderco-Forums [1]

Pictures

Categories