C15 Bob Terzuola

From Spydiewiki
Revision as of 15:31, 10 September 2008 by Peter1960 (talk | contribs) (→‎Variations)
Jump to navigationJump to search


Info
Important information: Editing of this article is needed!!!


In 1990 Spyderco started with the Bob Terzuola the Collaboration models. Besides this the C15 was the first Clipit with Linerlock (maybe even the first production knife with ball bearing detent), clip position for tip up/down and is said to be Spyderco's first domestic US production. Blade is a modified drop-point with an obtuse angle of 70°. Handle color is black, with Lanyard hole. The old Standard clip with three screws is used. It is said, that the first 1000 pieces had the insignias chemically etched on either side of the blade, thereafter all blades were engraved.

Appearance in catalogs

The Bob Terzuola appears in the 1993 product guide[1], the 1994 product guide[2], the 1997 product guide[3]


Designer

Robert Terzuola

History, mentionings etc. from the forums

...

Information from the Spyderco product guide

From the 1993 product guide:

"Robert Terzuola has gained the respect of his peers for his efficient high strenght designs that reflect a subtle military flavor. Our American-made CLIPIT showcases his 15 plus year experience as a master designer and knife maker. The modified drop-point blade is made of ATS-34 steel and pivots between high-lubricity nylon bushings to ensure glassy smooth action. Scales are secured with high-tensile allen screw. The clothing clip may be mounted to carry the knife tip up or tip down, and a Linerlock secures the blade in an open or closed position."[1]

Variations

The following variations of the Bob Terzuola are known:

SKU Handle Edge Steel From/To MSRP Note Number made Grind
C15P 6061-T6 aluminum black, bead blasted PE ATS-34 1990-1993 149,95$ N/A N/A flat grind
C15PS 6061-T6 aluminum black, bead blasted PS ATS-34 1990-1993 149,95$ N/A N/A flat grind
C15P 6061-T6 aluminum black, bead blasted PE ATS-34 1990-1993 149,95$ finger cutouts on scales N/A flat grind
C15PS 6061-T6 aluminum black, bead blasted PS ATS-34 1990-1993 149,95$ finger cutouts on scales N/A flat grind
C15P 6061-T6 aluminum black, bead blasted PE ATS-34 1990-1993 149,95$ finger cutouts on scales, scales stamped with "USA Made" N/A flat grind
C15PS 6061-T6 aluminum black, bead blasted PS ATS-34 1990-1993 149,95$ finger cutouts on scales, scales stamped with "USA Made" N/A flat grind
C15GPS G-10 black PS ATS-34 1994-1997 149,95$ engraving "Golden, Colorado, USA" under the Spyderco Logotype on blade, right- and left-hand version (first 3500 knives have individual serial numbers) N/A flat grind
C15GPS G-10 black PS ATS-34 1994-1997 149,95$ engraving "Golden, Colorado, USA" under the Spyderco Logotype on blade, right- and left-hand version (first 3500 knives have individual serial numbers) N/A flat grind

Most collectible variation

Questions regarding collecting the Bob Terzuola

Some interesting questions we are looking for an answer to:

  • Were there ever generations 1-3 availaible in right- and left-hand versions?

Technical information

Typical measurements (mm and grams) of the Bob Terzuola:

SKU Length overall Length closed Hole Ø Blade length Cutting edge Blade thickness Weight
C15 ? ? ? 89 ? ? ?
C15G 197 110 12 86 81 3,2 96

Typical measurements (Inches and ounces) of the Bob Terzuola:

SKU Length overall Length closed Hole Ø Blade length Cutting edge Blade thickness Weight
C15 ? ? ? 3 1/2 ? ? ?
C15G 7 3/4 4 5/16 15/32 3 3/8 3 3/16 1/8 3,4

References

  1. 1.0 1.1 Spyderco's product guide from 1993 is available for download here
  2. Spyderco's product guide from 1994 is available for download here
  3. Spyderco's product guide from 1997 is available for download here

Pictures