204MF Tri-Angle Sharpmaker
>>>UNDER CONSTRUCTION<<<
The 204MF Tri-Angle Sharpmaker is a complete sharpening kit suitable for maintaining knives and many other edged tools.
Appearance in catalogs
The 204MF Tri-Angle Sharpmaker appeared in the following catalogs:
Designer
Sal Glesser
History, mentionings from the forums etc.
Information from the Spyderco catalog on the web
204MF Tri-Angle Sharpmaker
"The key to sharpening any cutting tool is removing the steel at the edge while maintaining a consistent angle between the blade and the stone. Spyderco’s Tri-Angle Sharpmaker takes the mystery out of this process and enables anyone to sharpen a knife effectively with just a few minutes practice. Its durable ABS plastic base contains keyed holes that accurately set the stones’ sharpening angles at a 30° (15° each side) or 40° (20° each side) for sharpening knives. Simply keep the plane of your knife’s blade vertical and draw the edge along each stone to sharpen. It’s that simple. For serrated blades, use the rounded edges of the stones and a slightly looser grip to allow the stone to flow into the recesses of each serration. The Sharpmaker system includes two sets of high alumina ceramic stones: a pair of medium-grit (brown) stones for aggressive sharpening and a set of fine (white) stones for professional-grade finishing. A set of aluminum safety rods protects your hands while sharpening and all components snap into the self-contained ABS plastic base and lid for easy storage. Every Sharpmaker comes complete with a detailed instruction book and DVD that guides you step by step through the process of sharpening knives, scissors, awls, and many other tools.
Watch Sal demo the Sharpmaker on YouTube!
DVD Included""[1]
Variations
The 204MF Tri-Angle Sharpmaker is made in Golden, Colorado, USA, and features a:
- Walker Liner Lock
- Full stainless steel liners
- Straight Clip Point Blade
| SKU | Handle | Edge(s) | Steel | From/To | MSRP | Note | Number made | Grind | Clip | Clip positions | Collectors club |
| C204G | Contoured black G-10 | PE | N690Co | Apr. 2016-Oct. 2018 | 290.00$ (2020) | N/A | Full Flat | Silver deep pocket Wire | LH/RH, TU | Main |
Most collectible variation
Questions regarding collecting the 204MF
Some interesting questions we are looking for an answer to:
Questions with an answer:
Technical information
Measurements (mm and grams) of the C257 Pattadese:
| Variation | Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
| C257G | 183mm | 103mm | 80mm | 75mm | 11.8mm | 2.5mm | 77g |
Measurements (inches and ounces) of the C257 Pattadese:
| Variation | Length overall | Length closed | Length blade | Length edge | Hole Ø | Blade thickness | Weight |
| C257G | 7.22" | 4.06" | 3.16" | 2.95" | 0.46" | 0.098" | 2.7oz |
References
- ↑ The 204MF Tri-Angle Sharpmaker in Spyderco's online catalog
